HOT TUB FAQ's
STATE RULES / REGULATIONS
|
|
Our Rules and Users Guide
Step 1. Prior to using the tub it is important that that every individual rinses off in the shower to remove any body lotions, sunscreens, oils, and dirt. Failure to do so can cause jets and filters to become clogged.
Step 2. The lid is held in place by a large black bar which is mounted to the side of the tub. This bar does not come off of the tub, but rather flips back towards the north deck rail. First, unclip the black snaps that attach the lid to the tub. Then simply grab the lid (closest to the wall of the house) and flip it backwards. The bar will help facilitate the lid opening and will support it once flipped all the way back. If the lid is left open while not using the hot tub, the water temperature will drop and take 1 hour for every 5 degrees to heat back up. Please keep the lid closed and secured when not in use. The great thing about this lid is that one person can lift it.
Step 3. Jet Pump Control. Top left button on the control panel labeled ‘JETS’. Pressing the JET button and select options from LED panel.
Step 4. Light on/off and intensity controls. Top right button on control panel labeled ‘LIGHTS’.
The light control uses four positions: high, medium, low, and off. To turn on the spa light, press the LIGHT button. This will place all lights in the spa on the high setting. Press the light button again to lower the intensity of the lights to the medium setting and so forth. PLEASE TURN LIGHTS OFF WHEN YOUR ARE NOT IN THE HOT TUB.
- Please shower off before entering the Hot Tub.
- The Hot Tub Should Always be left on and in the heating cycle.
- The temperature is locked at 102 degrees F. Please do not attempt to adjust the temperature.
- Please only use towels provided for the Hot Tub in the Basket. The chlorine can damage the other bath towels.
- The Hot Tub is ready to go. The following will tell you how to remove the lid, adjust the jets, and adjust the lights. Just follow these easy steps when using;
Step 1. Prior to using the tub it is important that that every individual rinses off in the shower to remove any body lotions, sunscreens, oils, and dirt. Failure to do so can cause jets and filters to become clogged.
Step 2. The lid is held in place by a large black bar which is mounted to the side of the tub. This bar does not come off of the tub, but rather flips back towards the north deck rail. First, unclip the black snaps that attach the lid to the tub. Then simply grab the lid (closest to the wall of the house) and flip it backwards. The bar will help facilitate the lid opening and will support it once flipped all the way back. If the lid is left open while not using the hot tub, the water temperature will drop and take 1 hour for every 5 degrees to heat back up. Please keep the lid closed and secured when not in use. The great thing about this lid is that one person can lift it.
Step 3. Jet Pump Control. Top left button on the control panel labeled ‘JETS’. Pressing the JET button and select options from LED panel.
Step 4. Light on/off and intensity controls. Top right button on control panel labeled ‘LIGHTS’.
The light control uses four positions: high, medium, low, and off. To turn on the spa light, press the LIGHT button. This will place all lights in the spa on the high setting. Press the light button again to lower the intensity of the lights to the medium setting and so forth. PLEASE TURN LIGHTS OFF WHEN YOUR ARE NOT IN THE HOT TUB.
